Tansonic TQ19N series Embedded Voice Logger uses a standard 1U chassis structure with high-strength galvanized steel to improve the corrosion resistance of the chassis.Can be installed in a variety of ways, such as desktop or rack.The device is equipped with a high-performance 128G SSD to store data, and low-power operation saves energy.Support for expanding a 2.5 mechanical hard drive. Remote operation management is available through the network. With DC12V power port , VGA display port , USB keyboard port, mouse port , LAN network port , SPK3.5mm audio port , RS232 switch billing serial port, and recording port.Its convenient for users without computers or networks. Machine can be connected directly to run when reboot.
» Real time recording
When the logger device is being used ,the system will automatically record the voice of both party .The recording file will be saved into the harddisk of PC. At the same time,system will record dial in/out number and conversation date,time and so on.It will stop to record when the calls on-hook.
»Real time monitoring
Can monitor the channel on conversation without any disturbance to the line.
»Caller ID Records
Dian in/out number automatically records in the software,so that convenient for future inquiry.
When an incoming call was unanswered, the system would detect the CID and record it automatically
»Extension number records
When connecting to a PBX system,using our Startup pbx tool in our software,then it will can records all the extension number and save lots of costing.
Can slove the problem about both sides conversation sound no imbalance,like one side sound small,and the other side is too big,so that can hear the clearly sound.
It will pop up the client detail information of incoming call on the screen of computer.. It also can record your client address,telephone number, business record and so on contents.This function becomes your business helper. Support user rights management, different levels of different permissions, blacklist, VIP customer phone number automatic reminder, caller information can be sent to designated agents or working groups as required.
The user can set more kinds alarm remind,such as the harddisk space lack of,recording system disconnection,conversation delay and so on .After setting them,the system will send email to inform the administer.
It can upload the recording file to Server by FTP upload function,so that you can listen the recording even if you go on errands.
For each system is equipped with intelligent client software.After install the client software,it can do some monitoring, searching and cabel status and other functions.
Enter the IP address in IE browser then can inquiry the details of software. Support Iphone , Android system.
a.The recording files can be stored in the cloud server.
b.CMS features,apply for Cloud server and Database then can manage all the recording file in central management system.
CMS with Smart Client software and Central Management software.It can manage all the location recording file on LAN or WAN.It can obtain the host IP without manual search. It can do some monitor and search and also set the line number, department, and permissions of each device.
Channel: TQ1904N、TQ1908N、TQ1916N. There are 4ch,8ch,16ch.
Hard disk:SSD 128G
Voice file: WAV,MP3
Compression ratio: 8 times
Recording start mode:Voltage、Key、Sound control.
Consume power maximai: 15W
Input impedance: ≥1.5MΩ
Data speed: 64kbps/1s
Distortion degree: ≤2%
Call number: FSK、DTMF
FSK concoct mode: Logic 0(: 2200Hz±1%), Logic 1: 1200Hz±1%
DTMF code: 0~9、*、#、A、B、C、D
▶Built-in 64GB SSD
1.Device interface, 01 and 02 channel are in recording status , as shown below:
2.channel in the real-time monitoring state. As shown below:
3.Dial-in number in the field. As shown below:
4.The event log shows a detailed record of all the steps. As shown below:
5.Unanswered call records interface as shown before:
6.When connected to the PBX system, the extension number can be recorded .As shown below:
7.Line AGC,as shown below:
8.POPUP interface as shown below:
9.Email Alarm as shown below:
10.CMS interface as shown below:
11.FTP Backup interface as shown before:
12.WEB Query interface shown as below:
13.Cloud storage interface as shown below:
14.Smart Client software interface as shown below:
▶ Description of the front panel of the device. As shown below:
▶ Description of the back panel of the device. As shown below:
▶ Diagram of wiring connection method 1, as shown below:
▶Diagram of wiring connection method 2, as shown below:
▶List of product accessories. As shown below: